DEX carbide square milling cutter

Product Description

Name	End mill
Hardness	HRC45/HRC55/HRC60/HRC65/HRC70
Type	Flat/Ball Nose/Corner Radius/Rough
Flutes	1/2/3/4/5/6 Flutes
Size	Our standard size or as request
Coating	Altin, Tialn, Tisin, Tin, DLC,Nano, Diamond
Public errand	0-0.5um
Suitable to process	Copper,cast iron,carbon steel,mould Steel, Stainless Steel, tool Steel, etc.
OEM	OEM/ODM highly welcome

NOTE:

1. During using, appropriately reduce the cutting speed and feed rate, which can prolong the service life of the milling cutter.

2. When working, it is necessary to add cutting fluid to protect the knife edge, so that the cutting is smoother.

3. When the oxide film or other hardened layer remains on the surface of the workpiece, it can be removed by reverse milling.

Super Raw Material

ltem Grade	HRC45	HRC55	HRC60	HRC65
Details	Grain size 0.7um Co 10% Flexural strength 3320N/mm²	Grain size 0.6um Co10% Flexural strength 4000N/mm2	Grain size 0.5um Co12% Flexural strength 4300N/mm2	Grain size 0.5um Co10% Flexural strength 4300N/mm2

Super Coating

Details	TiN	TiAIN	AITiN	TISIN	DLC
Color	Golden	Purple	Black	antique brass	Dazzle black
HV	2300	3200	3400	3600	1000~4000
Thickness/μm	0.4	0.5	0.5	0.4	0.5-2.0
Friction coefficient	0.4	0.35	0.4	0.45	0.05
MAX Temperature	500	800	900	1000	400
Description	cost-effective	General	High speed Hige HRC	Processing copper, titanium, moldSteel	non-ferrousmetals, graphite andplastics

PRODUCT DETAILS

○ General

● Suitable

▲ Very suitable

ISO Material group

workpiece material

Carbon Steel

Alloy Steel、 Tools Steel

Stainless Steel

Cast iron

Aluminum Alloy

Cooper Alloy

Graphite

Heat ResistantAlloy

Titanium Alloy

Pre-hardened Steel
Hardened Steel

products series

hardness

～20HRC

～30HRC

～35HRC

～350HB

～45HRC

～55HRC

～60HRC

～65HRC

GEX

HRC45

●

○

PEX

HRC55

○

●

UEX

HRC60

●

○

P-UEX

●

○

HEX

HRC65

○

●

○

P-HEX

○

●

○

CEX

HRC70

●

○

P-CEX

●

○

AEX

HRC50

●

FEX

HRC58

●

P-FEX

HRC58

●

MEX

HRC50

●

TEX

HRC55

▲

○

●

DOHRE end mill for titanium alloy (4).jpg

Details

•The arc relief angle makes the tool more wear-resistant, the flat relief angle makes the tool sharper and stronger, the cutting process is lighter and faster, and the tool life is longer under the double cooperation.

•Smooth chamfering, easy and fast installation of the chuck, high gloss surface.

• Large chip removal design

DOHRE end mill for titanium alloy (6).jpg

DOHRE end mill for titanium alloy (2).jpg

AITIN-L application range:

•Suitable for the cutting of ordinary stainless steel, hardened stainless steel, ordinary die steel, hardened die steel, cast iron, copper and alloy steel with hardness below HRC45 degrees.

•The AL coating made with Japanese advanced technology and equipment contains high-component aluminum, which not only has high temperature oxidation resistance (800℃), but also can exert the best performance on processing tools under dry or high-speed conditions.

• Type: Deep groove milling cutter, ball end milling cutter, round nose milling cutter, can meet the finishing of your product surface quality.

AITIN-S application range:

•Suitable for high-efficiency cutting processing of ordinary steel, pre-hardened die steel cast iron, copper, alloy steel, ductile cast, and processing of materials with hardness below HRC48 degrees.

•The AS COATING coating made with Japanese advanced technology and equipment contains heat-resistant element silicon, which not only has high temperature oxidation resistance (1100°C), but also can exert the best performance on processing tools under dry or high-speed conditions.

• Types: End mills, ball end mills, round nose milling cutters, can meet the finishing of your product surface quality.

Packing&shipping

Features：
1.Range of application: use for ordinary stainless steel, ordinary mould steel, Hardened common steel, cast iron, copper, alloy steel with high effective process. Suitable for processing material with hardness below HRC65.
2. Structure of cutting tools : The sharp cutting matched with the good hardness ,Arc relief angle makes tool better wear-resistance, flat relief angle makes tool sharper. Cutters with two kinds of relief angle, cutting process will be faster, and tools will be longer life. Cross-center of flute top make drilling and milling better.
3. Coating of cutting tools: AlTIN coating, adopted advanced technology and equipement of Japan, Not only has high temperature oxidation resistance (800 °C), but also can achieve best on the condition of dry machining or high speed cutting.
4.The advanced technology and equipment imported from Germany.
5.Toppest materials of around the world (TaeguTec, Kennametal, AF K34/K44).
6.Multi-series of product supported: Square end mill, Ball nose end mills, Corner radius cutting tools, Roughing end mill, Long neck short flute end mill,etc.

Technology：
1.Blade Point
Blade belt: double blade belt design is adopted to determine a more wear-resistant edge.It adopts a blade design suitable for high-speed cutting,with a 2-blade edge and excellent chip removal!
2.Mirror chip removal slot
High capacity chip removal with strong cutting,smooth cutting discharge,can achieve high effiency machining.
3.Chamfering
Perfect chamfering,easy and fast installation chuck,high gloss knife body import essential features.

Get In Touch

Do you have a questions or an issues we can help you with?

Let’s talk about your project and how Dohre can help get your tools designed, manufactured and ready for the market.

DEX Titanium Alloy Specialized 4 Flutes Flat Milling Cutter

Size

application type